Casio XJ-450 - Manual (Page 80)

80
Using the Setup Menu
4.
After all the settings are the way you want, press the [MENU] key.
■Image Adjustment J Vertical Position
This sub-menu lets you adjust the vertical position of the input source image within the
projection area.
z This setting is not possible when there is no input signal.
z “Image Adjustment” main menu item settings are saved for the current signal type only
(XGA/60Hz, UXGA/60Hz, etc.), and not for the input signal source. Note, however, that the
number of signal type settings that can be saved is limited. Exceeding the limit causes
the oldest setting to be deleted automatically.
■Image Adjustment J Horizontal Position
This sub-menu lets you adjust the horizontal position of the input source image within the
projection area.
z This setting is not possible when there is no input signal.
z See “Image Adjustment J Vertical Position” for details about how settings are saved.