Using the setup menu setting explanations, Setting storage, Input settings j p-in-p input – Casio XJ-450 User Manual
Page 90
90
Using the Setup Menu
Setting Explanations
Auto:
Select this setting to have the projector switch the video signal system
automatically in accordance with the input signal from the video device
that is connected to the VIDEO or S-VIDEO input terminal. This is the
setting you should normally use.
Other settings: Each setting selects the applicable video system. Use these settings
when you want to specify only one specific video signal for the VIDEO
and S-VIDEO input terminal.
Setting Storage
This setting is saved for the VIDEO and S-VIDEO input terminal only.
■Input Settings J P-in-P Input
This sub-menu lets you select the input source for the image that appears in the P-in-P sub-
window (page 59).
Input Source Specific Menu Items
Setting Explanations
VIDEO:
Select VIDEO as the input source of the sub-window.
S-VIDEO: Select S-VIDEO as the input source of the sub-window.
Setting Storage
This setting is saved for the RGB input terminal only.
Input Source
Available Items (Parentheses indicate defaults.)
RGB
(VIDEO), S-VIDEO
Component
None
S-VIDEO
VIDEO
No Signal
(VIDEO), S-VIDEO
* Only when the currently selected input source is RGB.