Casio XJ-450 - Manual (Page 86)

86
Using the Setup Menu
■Screen Settings J Projection Mode
Use this sub-menu to specify whether projection will be from the front of the screen or the
back of the screen.
Input Source Specific Menu Items
Setting Explanations
Front: For projection from the front of the screen.
Rear: For projection from the back of the screen. This setting flips the front projected
image horizontally.
Setting Storage
A single setting is stored, which is applied to all input sources.
■Screen Settings J Ceiling Mount
Use this sub-menu to configure the projector for use in an installation in which it is positioned
upside down.
Input Source Specific Menu Items
Setting Explanations
On: Flips the projected image horizontally and vertically.
Off: Projects a normal image.
Setting Storage
A single setting is stored, which is applied to all input sources.
Input Source Available Items (Parentheses indicate defaults.)
RGB (Front), Rear
Component
S-VIDEO
VIDEO
No Signal
Input Source Available Items (Parentheses indicate defaults.)
RGB On, (Off)
Component
S-VIDEO
VIDEO
No Signal