Losi LOSB9606 - Manual (Page 11)

WARNING AND SAFETY NOTES
Did you select the appropriate program suitable for the type of battery that you are
charging?
Did you set up adequate current for charging or discharging?
Have you checked the battery voltage? Lithium battery packs can be wired in parallel
and in series, e.g. a 2-cell pack can be 3.7V (in parallel) or 7.4V (in series).
Have you checked that all connections are firm and secure? Make sure there are no
intermittent contacts at any point in the circuit.
Charging
10
Please keep in mind the following points before charging:
While charging, a specific quantity of electrical energy is fed into the battery. The charge
quantity is calculated by multiplying charge current by charge time. The maximum permissible
charge current varies depending on the battery type and its performance. Check the
manufacturer’s specifications for the battery you are using. Only batteries that are expressly
stated to be capable of quick-charge should be charged at rates higher than the standard charge
current.
Connect the battery to the terminal of the charger (red is positive and black is negative). Use
conductors with adequate cross-section and high-quality connectors, normally gold-plated, to
meet the charging and discharging current demands.