Losi LOSB9606 - Manual (Page 28)

Various information in the program
-
-
-
-
-
E n d V o l tage
12.6V(3s)
C a p a city Cutoff
On 5000mAh
S a f e t y T i m e r
ON 200 min
U S B / T e m p S e l e c t
USB Enabled
E x t . T e m p 2 6 C
I N P o w e r Voltage
1 2 . 5 6 V
4 . 1 4 4 . 1 6 4.09
0 . 0 0 0 . 0 0 0.00
27
The end voltage is displayed when the program is finished.
The 3-pin connector is configured as a USB port.
The external temperature is displayed when the temperature probe is used.
Present input voltage.
The voltage of each cell in a battery is displayed. Battery must be connected
with its balance leads to the charger’s balance port on the right side of the
charger. Voltage for up to six cells can be displayed. Balancing only occurs
when the charger is in the balance charge mode.