Losi LOSB9606 - Manual (Page 26)

Data storage program
Data storage program
Voltage
P R O G R A M S E L E C T
SAVE DATA
S A V E [ 0 1 ] N iMH
14.4V 3000mAh
N i M H CHARGE At *
CUR LIMIT 5.0A
N i M H D I C H A R G E *
1.0A 11.0V
N i M H CYCLE *
DCHG>CHG 3
Data
number Capacity
-
- -
+
- +
- +
+ +
Type of
battery
Start
Enter
Start
Enter
‘>3seconds’
Batt type
stop
S a ve . . .
- - + +
Start
Enter
‘>3seconds’
25
For your convenience, this charger has a data storage and load program. It can store five different
battery programs to suit the different specifications for your batteries. You can recall program data
when charging or discharging without setting up the program again. Press the ‘START/ENTER’ key to
make it blink, then press the ‘+’ or ‘-’ keys to set the parameter.
Changing the parameter in this screen will not affect the charge or
discharge process. This just shows the specifications of the battery. This
screen depicts a 12-cell NiMH battery pack with a capacity of 3000mAh.
Set up the charge current in the manual mode or the current limit in the
auto mode. Press the ‘+’ and ‘-’ keys simultaneously to make the current
filed blink to switch to charge mode.
Set up the discharge current and final voltage.
Set up the charge/discharge sequence and cycle number.
Saving the data.