Dri ving an d pa rki ng, Automatic transmission – Mercedes-Benz G-Class 2014 Owners Manual User Manual
Page 151

Driving tips
Accelerator pedal position
Your style of driving influences how the
automatic transmission shifts gear:
R
little throttle: early upshifts
R
more throttle: late upshifts
Kickdown
Use kickdown for maximum acceleration:
X
Depress the accelerator pedal beyond the
pressure point.
The automatic transmission shifts to a
lower gear depending on the engine speed.
X
Ease off the accelerator pedal once the
desired speed is reached.
The automatic transmission shifts back up.
Rocking the vehicle free
Rocking the vehicle free by shifting back and
forth between transmission positions D and
R can help to free a vehicle that has become
stuck in mud or snow. The vehicle's engine
management restricts switching between
transmission positions D and R to speeds up
to a maximum of 5 mph (9 km/h). To shift
back and forth between transmission
positions D and R, move the selector lever
forwards and backwards past the point of
resistance.
Towing a trailer
X
Drive in the middle of the engine speed
range on uphill gradients.
X
Limit shift range to 3 or 2 depending on the
uphill or downhill gradient (
Y
page 150),
even if cruise control or SPEEDTRONIC is
activated.
X
Shift the transfer case into low-range
driving position LOW RANGE on extreme
uphill gradients or steep downhill gradients
(
Y
page 194).
Program selector button
General notes
The program selector button allows you to
choose between drive programs with
different driving characteristics.
i
In AMG vehicles, drive program E is called
drive program C.
Drive programs
E Economy
C Controlled
Efficiency
Comfortable, economical
driving
S Sport
Sporty driving style
M Manual
Manual gear shifting
i
When the engine is started, the automatic
transmission always switches to automatic
drive program E (drive program C in AMG
vehicles).
i
For further information on the automatic
drive program, see (
Y
page 150).
i
Only change from automatic drive
program E or S to manual drive program
M when the vehicle is stationary.
Selecting the drive program
Example: program selector button
X
Press program selector button :
repeatedly until the letter for the desired
Automatic transmission
149
Dri
ving
an
d
pa
rki
ng
Z