Break dow n ass is tanc e, Fuses – Mercedes-Benz G-Class 2014 Owners Manual User Manual

Page 310

Advertising
background image

Towing in the event of malfunctions

General notes
!

If you are removing the propeller shaft,

use M10 nuts as spacers on the M8 bolts

and secure them with M8 nuts.
New self-locking nuts must be used when

the propeller shafts are refitted.

X

Observe the safety notes as you do so

(

Y

page 305).

i

Consult an authorized Mercedes-Benz

Center.

Engine damage, gear damage or

electrical malfunctions

X

Move the selector lever to

position N(

Y

page 145).

X

Shift the transfer case to

neutral(

Y

page 195).

In the event of damage to the transfer

case

Have the propeller shafts between the axles

and the transfer case removed.

In the event of damage to the front axle

Have the propeller shaft between the rear

axle and the transfer case removed.
Have the vehicle towed with the front axle

raised.

In the event of damage to the rear axle

Have the propeller shaft between the front

axle and the transfer case removed.
Have the vehicle towed with the rear axle

raised and with wheel rollers under the front

axle.

Tow-starting (emergency engine

starting)

!

Vehicles with automatic transmission

must not be tow-started. You could

otherwise damage the automatic

transmission.

You can find information on "Jump-starting"

under (

Y

page 303).

Fuses

Important safety notes

G

WARNING

If you manipulate or bridge a faulty fuse or if

you replace it with a fuse with a higher

amperage, the electric cables could be

overloaded. This could result in a fire. There

is a risk of an accident and injury.
Always replace faulty fuses with the specified

new fuses having the correct amperage.

!

Only use fuses that have been approved

for Mercedes-Benz vehicles and which

have the correct fuse rating for the system

concerned. Otherwise, components or

systems could be damaged.

The fuses in your vehicle serve to close down

faulty circuits. If a fuse blows, all the

components on the circuit and their functions

stop operating.
Blown fuses must be replaced with fuses of

the same rating, which you can recognize by

the color and value. The fuse ratings are listed

in the fuse allocation chart.

i

If a fuse has blown, contact a breakdown

service or an authorized Mercedes-Benz

Center.

If a newly inserted fuse also blows, have the

cause traced and rectified at a qualified

specialist workshop, e.g. an authorized

Mercedes-Benz Center.

308

Fuses

Break

dow

n

ass

is

tanc

e

Advertising