Lights and windshield wipers, Exterior lighting – Mercedes-Benz CLS-Class 2012 Owners Manual User Manual

Page 109

Advertising
background image

Low-beam headlamps

X

To switch on the low-beam headlamps:

turn the SmartKey in the ignition lock to
position

2 or start the engine.

X

Turn the light switch to L.
The L indicator lamp in the instrument
cluster lights up.

Daytime running lamps

Daytime running lamps in Canada
The "daytime running lamps" function is
required by law in Canada. It cannot therefore
be deactivated.

X

Turn the light switch to Ã.
With the engine running: depending on the
ambient light, the daytime running lamps or
the low-beam headlamps are switched on.
When the low-beam headlamps are
switched on, the L indicator lamp in the
instrument cluster lights up.

When the engine is running and the vehicle is
stationary: if you move the selector lever from
a drive position to

P, the daytime running

lamps/low-beam headlamps go out after
three minutes.
When the engine is running, the vehicle is
stationary and in high ambient light
brightness: if you turn the light switch
to T, the daytime running lamps and the
parking lamps are switched on.
If the engine is running and you turn the light
switch to L, the manual settings take
precedence over the daytime running lamps.

Daytime running lamps in the USA
In the USA, the daytime running lamps are
deactivated upon delivery from the factory.

X

To activate the daytime running

lamps: activate the daytime running lamps

function in the on-board computer
(

Y

page 209).

X

Turn the light switch to Ã.
With the engine running: depending on the
ambient light, the daytime running lamps or
the low-beam headlamps are switched on.
When the low-beam headlamps are
switched on, the L indicator lamp in the
instrument cluster lights up.

If the engine is running and you turn the light
switch to T or L, the manual settings
take precedence over the daytime running
lamps.

Automatic headlamp mode

X

To switch on automatic headlamp

mode: turn the light switch to Ã.
SmartKey in position

1 in the ignition lock:

the parking lamps are switched on or off
automatically depending on the brightness
of the ambient light.
With the engine running: depending on the
brightness of the ambient light, the daytime
running lamps

7

or the low-beam headlamps

are switched on or off automatically.
When the low-beam headlamps are
switched on, the L indicator lamp in the
instrument cluster lights up.

G

WARNING

If the light switch is set to Ã, the low-beam
headlamps will not come on automatically if
it is foggy. This could endanger you and
others. Therefore, turn the light switch to
L in fog.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times.

Headlamp cleaning system

The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated ten times while the lights are on and

7

Only if daytime running lamps have been activated via the on-board computer.

Exterior lighting

107

Lights and windshield wipers

Z

Advertising