Driving and parking, Driving systems – Mercedes-Benz CLS-Class 2012 Owners Manual User Manual

Page 181

Advertising
background image

The rear view camera is located in the handle
strip of the trunk lid.

:

Rear view camera

View through the camera

The area behind the vehicle is displayed as a
mirror image, as in the rear-view mirror.

G

WARNING

The rear view camera is only an aid and may
display obstacles

R

from a distorted perspective

R

inaccurately

R

may not display obstacles at all

The rear view camera does not relieve you of
the responsibility to be cautious. Take care
and pay careful attention. The rear view
camera may not show objects which are

R

very close to the rear bumper

R

under the rear bumper

R

above the trunk handle

You are responsible for safety at all times and
must continue to pay attention to the
immediate surroundings when parking and
maneuvering. This includes the area behind,
in front of, and beside the vehicle. Otherwise
you could endanger yourself and/or others.

G

WARNING

The rear view camera will not function or will
not fully function if:

R

the trunk lid is open

R

it is raining or snowing strongly or if it is
foggy

R

it is night or if you are parking/
maneuvering your vehicle in a very dark
area

R

a very bright white light is affecting the
camera

R

the immediate vicinity is illuminated with
fluorescent light (the display of the
COMAND system can flicker)

R

temperature changes abruptly, for example
if you drive out of the cold into a heated
garage (condensation on the lens)

R

the camera lens is dirty or covered

R

the rear of your vehicle is damaged
In this case, have the position and the
setting of the camera checked at a
specialist workshop. Mercedes-Benz
recommends that you consult a Mercedes-
Benz Center for this purpose.

Do not use the rear view camera in these
situations. You could otherwise injure
yourself and other people and/or cause
damage - including damage to your vehicle -
while parking/maneuvering.

Activating the rear view camera

X

Make sure that the SmartKey is in position
2 in the ignition lock.

X

Make sure that the "rear view camera"
function is selected in COMAND (see the
separate operating instructions for
COMAND).

X

Engage reverse gear.
The area behind the vehicle is shown in the
COMAND display.

Driving systems

179

Driving and parking

Z

Advertising