Night view assist plus, Driving and parking, Driving systems – Mercedes-Benz CLS-Class 2012 Owners Manual User Manual

Page 183

Advertising
background image

Night View Assist Plus

Important safety notes

In addition to the illumination provided by the
normal headlamps, Night View Assist Plus
uses infrared light to illuminate the road. The
Night View Assist Plus camera picks up the
infrared light and displays a grayscale image
in the COMAND display. The image displayed
in COMAND corresponds to a road lit up by
high-beam headlamps. This enables you to
see the road's course and any obstacles in
good time. If pedestrian recognition is
activated, pedestrians recognized by the
system are highlighted in the Night View
Assist Plus display.

G

WARNING

Night View Assist Plus is only an aid designed
to assist driving. It is not a substitute for
attentive driving. Do not rely solely on the
Night View Assist Plus display. Continue to
look through the windshield. You are
responsible for safety and must drive in
accordance with traffic conditions. You could
otherwise put yourself and others in danger.
The system may be impaired or unavailable if:

R

there is poor visibility, e.g. due to snow,
rain, fog or heavy spray.

R

the windshield is dirty, fogged up or
covered, for instance by a sticker, in the
vicinity of the camera.

R

you are driving on bends, uphill gradients
or downhill gradients.

Light from the headlamps of oncoming
vehicles does not affect the Night View Assist
Plus display in the multifunction display. This
is also the case if you cannot switch on the
high-beam headlamps because of oncoming
traffic.

G

WARNING

The Night View Assist Plus cannot record
objects immediately in front of or next to the
vehicle. When maneuvering, continue to look
through the windshield. Make sure no

persons or animals are in the area in which
you are maneuvering. You could otherwise
injure them.

i

Infrared light is not visible to the human

eye and therefore does not glare. Night
View Assist Plus can therefore remain
switched on even if there is oncoming
traffic.

:

Night View Assist Plus camera

Switching on Night View Assist Plus

You can only activate Night View Assist Plus
if:

R

the SmartKey is in position

2 in the ignition

lock.

R

it is dark.

R

the light switch is in the c or L
position.

R

reverse gear has not been engaged.

Driving systems

181

Driving and parking

Z

Advertising