Driving and parking, Driving systems – Mercedes-Benz CLS-Class 2012 Owners Manual User Manual

Page 184

Advertising
background image

X

Make sure that COMAND is switched on.

X

Press button :.
The Night View Assist Plus display appears
in the COMAND display.

:

Night View Assist Plus display

;

Pedestrian recognized

=

Framing

?

Symbol for active pedestrian recognition

You can read about how to adjust the
brightness of the COMAND display in the
COMAND operating instructions.

i

The infrared headlamps only switch on

when the vehicle is driving at speeds of at
least 6 mph (10 km/h). This means that you
do not have the full visual range while
stationary and cannot check whether Night
View Assist Plus is working.

Pedestrian recognition

G

WARNUNG

Pedestrian recognition may be impaired or
inoperative if:

R

pedestrians are partially or entirely
obscured by objects, e.g. parked vehicles.

R

the silhouette of the pedestrian in the Night
View Assist Plus display is incomplete or
interrupted, e.g. by powerful light
reflections.

R

pedestrians do not contrast with the
surroundings.

R

pedestrians are not standing upright, for
example, if they are sitting, crouching or
lying down.

i

Animals are not recognized by pedestrian

recognition.

Night View Assist Plus is able to recognize
pedestrians by typical characteristics, e.g. a
silhouette in the shape of a person.
Pedestrian recognition is then switched on
automatically if:

R

Night View Assist Plus is activated.

R

you are driving faster than 6 mph
(10 km/h).

R

the surroundings are dark, e.g. when
driving outside built-up areas without
street lighting.

If pedestrian recognition is active,
symbol ? appears. If pedestrians are
recognized, they are framed = and thereby
highlighted. If the pedestrian recognition
system has brought a pedestrian to your
attention, look through the windshield to
evaluate the situation. The actual distance to
objects and pedestrians cannot be gauged
accurately by looking at a screen.
It may be the case that objects are highlighted
as well as pedestrians.

Fogged up or dirty windshield

If the windshield in front of the camera is
fogged up or dirty on the inside or outside, the
Night View Assist Plus display is affected.

G

WARNING

Please do not forget that your primary
responsibility is to drive the vehicle. A driver's
attention to the road must always be his/her
primary focus when driving. For your safety
and the safety of others, stop before trying to
remove window fogging or cleaning the
windshield in front of the Night View Assist
Plus camera.

182

Driving systems

Driving and parking

Advertising