Board computer, Computer, On-board computer and displays – Mercedes-Benz CLS-Class 2012 Owners Manual User Manual
Page 211: Menus and submenus
Lights
Setting the brightness of the instrument
cluster lighting and switches
X
Press the = or ; button on the
steering wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Brightness Display/Switches:
function.
You will see the selected setting.
X
Press the a button to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from
Level 1
to
Level 5
(bright).
X
Press the a or % button to save the
setting.
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the
Day Lights
function and the light switch is set to Ã,
the daytime running lamps are automatically
switched on during daylight hours when the
engine is running.
In the dark, the following also light up:
R
the low-beam headlamps
R
the parking lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamps
X
Press the = or ; button on the
steering wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Day Lights
function.
If the
Daytime Running Lights
have
been switched on, the cone of light and the
W symbol in the multifunction display
are shown in red.
X
Press the a button to save the setting.
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press the a button to confirm.
X
Press : or 9 to select the
Adapt.
Highbeam
function.
If the
Adapt. Highbeam
function has been
switched on, the cone of light and the
_ symbol in the multifunction display
are shown in red.
X
Press the a button to save the setting.
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select
Amb. light +/-
.
X
Press the a button to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from
Off
to
Level
5
(bright).
X
Press the a or % button to save the
setting.
Menus and submenus
209
On-board computer and displays
Z