Maximum load rating, Maximum permissible tire pressure, Maximum load on one tire – Mercedes-Benz CLS-Class 2012 Owners Manual User Manual

Page 339: Psi (pounds per square inch), Aspect ratio, Tire pressure, Tire pressure of cold tires, Tread, Bead, Sidewall

Advertising
background image

Maximum load rating

The maximum load rating in kilograms or
pounds is the maximum weight for which a
tire is approved.

Maximum permissible tire pressure

Maximum permissible tire pressure for one
tire.

Maximum load on one tire

Maximum load on one tire. This is calculated
by dividing the maximum axle load of one axle
by two.

PSI (pounds per square inch)

A standard unit of measure for tire pressure.

Aspect ratio

Relationship between tire height and tire
width in percent.

Tire pressure

This is pressure inside the tire applying an
outward force to each square inch of the tire's
surface. The tire pressure is specified in
pounds per square inch (psi), in kilopascal
(kPa) or in bar. The tire pressure should only
be corrected when the tires are cold. For this,
the vehicle must have been stationary for at
least three hours or not have traveled more
than 1.6 km (1 mile) in this time.

Tire pressure of cold tires

Tire pressure when the vehicle has been
stationary for at least three hours or not have
traveled more than 1.6 km (1 mile) in this
time.

Tread

The part of the tire that comes into contact
with the road.

Bead

The tire bead ensures that the tire sits
securely on the wheel. There are several steel
wires in the bead to prevent the tire from
coming loose from the wheel rim.

Sidewall

The part of the tire between the tread and the
bead.

Weight of optional extras

The combined weight of those optional extras
that weigh more than the replaced standard
part and more than 2.3 kilograms (5 lbs).
These optional extras, such as high-
performance brakes, level control, a roof rack
or a high-performance battery, are not
included in the curb weight and accessory
weight.

TIN (Tire Identification Number)

This is a unique identifier which can be used
by a tire manufacturer to identify tires, for
example for a product recall, and thus identify
the purchasers. The TIN is made up of the
manufacturer's identity code, tire size, tire
type code and the manufacturing date.

Load bearing index

The load bearing index (also load index) is a
code that contains the maximum load bearing
capacity of a tire.

Definition of terms for tires and loading

337

Wheels and tires

Z

Advertising