Mercedes-Benz GLK-Class 2010 Owners Manual - Manual (Page 130)

F Tuning to a station via station search
(
Y page 138)
Fast rewind ( Y page 153)
Skipping backwards to a track
(
Y page 153)
G Confirming a passcode
(
Y page 159)
Accepting a call ( Y page 167)
Initiating a call ( Y page 165)
Redial ( Y page 166)
H Rejecting a call ( Y page 167)
Ending an active call ( Y page 167)
I Opening system settings menu
(
Y page 135)
J Switching sound on/off
(
Y page 133)
Switching hands-free microphone
on/off (
Y page 167)
K Switching to telephone mode
(
Y page 155)
L Sound settings ( Y page 133)
Audio display
! Avoid touching the audio display at all
times. The display has a very sensitive high-
gloss surface, there is a risk of it being
scratched. Do not press directly in the
display face. Otherwise, the audio display
will be damaged.
i For information about cleaning and care
of the audio display, see “Audio or
COMAND display” (
Y page 256).
Display
The currently selected mode and the
associated menus are shown on the audio
display. The audio display is divided into
several areas.
Example illustration: Radio selected
Status line = displays the time and the
current settings for radio and telephone
mode.
You can request the required function using
menu bar :.
The selection is made using the audio
controller.
Mobile phone readiness is indicated by
additional information being shown in the
status line:
R
In the telephone main menu: Name of the
Bluetooth
® device (calls made and
received via the Bluetooth ® interface)
( Y page 160).
R
Mobile phone network signal strength
r. This information will only be shown
with suitable mobile phones.
R
The receiver symbol indicates whether a
call is active or not.
¢ No active call
ö Active call
In this example, the audio main function is set
to the FM radio mode and main area ; is
active.
i The layout of the menus may vary
depending on your vehicle’s equipment.
This manual shows the menus for a fully
equipped vehicle.
Instrument cluster multifunction
display
Please refer to the “Control system” section
of this manual (
Y page 110) for function
descriptions and operation of the instrument
cluster multifunction display and
128
Audio system
Controls in detail
X204_AKB; 3; 23, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 128