Mercedes-Benz GLK-Class 2010 Owners Manual - Manual (Page 309)

X Fold wire clip = back and press it down on
bulb holder to engage it in the arrestor
hook.
X Connect electric plug ; on bulb ?.
X Align housing cover : and turn it
clockwise.
X Driver’s side only: Fix the washer fluid
reservoir (
Y page 306).
X Install the cover above the headlamp
(
Y page 306).
High-beam and high-beam flasher bulb
(halogen headlamps only)
X Turn housing cover : counterclockwise
and remove it.
X Turn housing cover : counterclockwise
and remove it.
X Press handle ; in direction of the arrow
until the bulb socket is released.
X Pull out the bulb socket using handle ;.
X Pull the bulb out of bulb socket.
X Gently press the new bulb into bulb socket.
Lamp pin = must point up.
X Place bulb socket back into the housing
X Pull bulb socket handle ; until the bulb
socket engages.
X Align housing cover : and turn it
clockwise until it engages.
X Driver’s side only: Fix the washer fluid
reservoir (
Y page 306).
X Install the cover above the headlamp
(
Y page 306).
Parking and standing lamp bulb
X Turn housing cover : counterclockwise
and remove it.
X Pull out bulb socket ;.
X Pull the bulb out of bulb socket ;.
X Insert the new bulb into bulb socket ;.
X Insert bulb socket ;.
X Align housing cover : and turn it
clockwise.
X Driver’s side only: Fix the washer fluid
reservoir (
Y page 306).
X Install the cover above the headlamp
(
Y page 306).
Replacing bulbs
307
Practical hints
X204_AKB; 3; 23, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 307
Z