Compass, Controls in detail, Useful features – Mercedes-Benz GLK-Class 2010 Owners Manual User Manual

Page 201

Advertising
background image

X

Operation: Open cover =.

X

Switch on the ignition.

X

Insert the plug of the small device into
115V AC socket :.
LED ; comes on.

If LED ; does not come on, refer to the
section on possible nonoperation causes.

X

Switching off: Pull the plug out of 115V AC

socket :.
Do not pull on the cable.

X

Close cover =.

Possible nonoperation causes:

R

The on-board voltage of the vehicle is not
within the permissible voltage range.

X

Start the engine.

R

The temperature of the DC/AC inverter is
temporarily too high.

X

Pull the plug of the small device out of
115V AC socket : and plug it in again
after waiting a few minutes.

R

Some small devices have a continuous
power rating of less than 150 W but a very
high switch-on current. Such devices will
not operate. When connecting such a
device, 115V AC socket : will not provide
power.

If LED ; still does not come on, contact an
authorized Mercedes-Benz Center.

Compass

i

In order to receive an accurate reading in

the interior rear view mirror :, the
compass must be calibrated and the
magnetic field zone set.

X

Calling up the compass: Press button
= briefly.
The compass displays the direction into
which the vehicle is currently traveling:

N,

NE, E, SE, S, SW, W, or NW.

X

Compass adjustment: Determine your

location on the basis of the following zone
maps.

Zone map North America

Useful features

199

Controls in detail

X204_AKB; 3; 23, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-16T19:16:58+02:00 - Seite 199

Z

Advertising