Garage door opener, Controls in detail, Useful features – Mercedes-Benz GLK-Class 2010 Owners Manual User Manual

Page 207

Advertising
background image

The SOS button will flash and the message

Connecting Call will appear in the
multifunction display to indicate receipt of
the door unlock command.
If the tailgate recessed handle was pulled
for more than 20 seconds before door
unlock authorization was received by the
Customer Assistance Center, you must
wait 15 minutes before pulling the tailgate
recessed handle again.

Remote door lock

If you have forgotten to lock your vehicle and
are no longer near it, you can have it locked
remotely through the Customer Assistance
Center.
The vehicle can be remotely locked within
four days after the ignition has been switched
off.

X

Contact the Customer Assistance Center
at 1-800-FOR-MERCedes
(1-800-367-6372) (USA only) or
1-888-923-8367 (Canada only).
You will be asked to provide your password.

When you are inside your vehicle the next
time and switch on the ignition, the message

Tele Aid Doors locked by remote

control will appear on the multifunction
display.

i

The remote door lock feature is available

if the relevant cellular phone network is
available and data connection is possible.

Stolen Vehicle Recovery Services

In the event your vehicle was stolen:

X

Report the incident to the police.
The police will issue a numbered incident
report.

X

Pass this number on to the Customer
Assistance Center along with your
password.
The Customer Assistance Center will then
attempt to covertly contact the vehicle’s
Tele Aid system. Once the vehicle is
located, the Customer Assistance Center

will contact the local law enforcement and
you. The vehicle’s location will only be
provided to law enforcement.

i

If the anti-theft alarm stays on for more

than 30 seconds, the Tele Aid system will
notify the Customer Assistance Center
automatically.

Garage door opener

The integrated remote control can operate up
to three separately controlled devices
compatible with HomeLink

®

or some other

systems.

G

Warning!

Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent
potential harm or damage. When
programming a garage door opener, the door
moves up or down. When programming a gate
operator, the gate opens or closes.
Do not use the integrated remote control with
any garage door opener that lacks safety stop
and reverse features as required by U.S.
federal safety standards (this includes any
garage door opener model manufactured
before April 1, 1982). A garage door that
cannot detect an object - signaling the door
to stop and reverse - does not meet current
U.S. federal safety standards.
When programming a garage door opener,
park vehicle outside the garage.
Do not run the engine while programming the
integrated remote control. Inhalation of
exhaust gas is hazardous to your health. All
exhaust gas contains carbon monoxide (CO),
and inhaling it can cause unconsciousness
and possible death.

Useful features

205

Controls in detail

X204_AKB; 3; 23, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-16T19:16:58+02:00 - Seite 205

Z

Advertising