Mercedes-Benz E-Class 2009 Owners Manual - Manual (Page 101)

Seats
99
1 Head restraint release switch
X Switch on the ignition.
X Press the symbol-side on switch 1 to
release the head restraints.
Placing rear seat head restraints upright
X Pull the head restraint forward until it locks
into position.
Removing and installing rear seat head
restraints (vehicles with split rear seat
bench only)
1 Release catch
X Removing: Fold the seat backrest forward
( Y page 205).
X Fold back head restraint ( Y page 98).
X Press head restraint release catch 1 and
pull the head restraints out of the guides.
X Fold the seat backrest back to its original
position.
X Installing: Insert head restraint and push
it down until it engages.
X Make sure you place the correct head
restraint on the middle seat. It is marked
with the letter “M” on the outside of the
metal bars.
X Make sure the head restraints engage fully.
Wagon
Folding rear seat head restraints back
(rear outer seats only)
1 Release button
X Press release button 1 and fold the head
restraints backward.
Controls in detail
Z