Controls in detail – Mercedes-Benz E-Class 2009 Owners Manual User Manual
Page 214
Loading and storing
212
X
Place load between the cargo belt and the
side wall of the cargo compartment.
X
Press locking button
3
on belt reel
1
.
With the other hand, slowly pull cargo belt
over load until the load is properly secured.
Telescoping rod
The telescoping rod can be used to tighten
the load against the rear seats so as to secure
it from slipping.
1
Telescoping rod
2
Mounting element
X
Insert one mounting element
2
into each
cargo rail.
X
Turn mounting element
2
in the cargo rail
to
N
.
X
Insert telescoping rod
1
into mounting
element
2
.
X
Turn mounting element
2
in the cargo rail
until it engages in position
j
.
You should be able to feel mounting
element
2
engage in the cargo rail.
When you are using the storage box in the
cargo compartment, the seat backrests of
the seats in front of it must be completely
engaged to the rear, and the twin roller
blind must be installed.
Do not exceed the storage box’s maximum
load of 44 lb (20 kg), as it could otherwise
become detached during an accident or
sharp braking maneuvers, and could injure
you or other passengers.
The storage box in the cargo compartment is
covered by the rear seat bench.
1
Storage box
2
Cargo compartment floor
3
Seat backrests
4
Locking hooks
X
Installing: Fold seat backrests
3
forward
X
Insert storage box
1
from within the cargo
compartment with the opening pointing in
direction of travel.
X
Press locking hooks
4
of storage box
1
into the space between seat backrests
3
and cargo compartment floor
2
.
X
Fold seat backrests
3
to the original
Controls in detail