Extending and retracting the roller sunblinds, Controls in detail – Mercedes-Benz E-Class 2009 Owners Manual User Manual
Page 199
Panorama roof with power tilt/sliding panel (sedan)
197
Panorama roof with power tilt/sliding
panel (sedan)
The roller sunblinds only operate with the tilt/
sliding panel closed. The front and rear roller
sunblind cannot be operated individually.
When extending the roller sunblinds, make
sure no one is in danger of being injured by
the extending procedure. The extending of
the roller sunblinds can be immediately
halted by releasing the switch.
Roof panel switch
1
Retracting
2
Extending
Roller sunblinds switch, rear
1
Retracting
2
Extending
X
Switch on the ignition.
X
Retracting/Extending: Move the roof
panel switch to the resistance point in the
required direction of arrow
1
or
2
until
the roller sunblinds have reached their
desired position.
X
Express retracting: Push the roof panel
switch past the resistance point in
direction of arrow
1
and release.
The roller sunblinds retract completely.
X
Stopping during express retracting:
Move the roof panel switch in any direction.
When opening or closing the tilt/sliding
panel, make sure there is no danger of
anyone being harmed by the opening/
closing procedure.
The opening procedure of the tilt/sliding
panel can be immediately halted by
releasing the switch or, if the switch was
moved past the resistance point and
released, by moving the switch in any
direction.
The closing procedure of the tilt/sliding
panel can be immediately halted by
releasing the switch.
The panorama roof with tilt/sliding panel is
made out of glass. In the event of an
accident, the glass may shatter. This may
result in an opening in the roof.
In a vehicle rollover, occupants not wearing
their seat belts or not wearing them
properly may be thrown out of the opening.
Controls in detail
Z