Mercedes-Benz E-Class 2009 Owners Manual - Manual (Page 353)

Replacing bulbs
351
X Pull the bulb out of bulb socket 4 .
X Gently press the new bulb into bulb socket
4 .
X Place bulb socket 4 back into the housing
and turn it clockwise until it engages.
X Align housing cover 1 and turn it
clockwise until it engages.
High-beam and high-beam flasher bulb
(halogen headlamps)/high-beam
flasher bulb (Bi-Xenon headlamps)
X Turn bulb socket 2 with the bulb
counterclockwise and remove it.
X Pull the bulb out of bulb socket 2 .
X Gently press the new bulb into bulb socket
2 .
X Place bulb socket 2 back into the housing
and turn it clockwise until it engages.
Front turn signal lamp bulb
X Turn bulb socket 5 with the bulb
counterclockwise and remove it.
X Gently press onto the bulb and turn it
counterclockwise out of bulb socket
5 .
X Gently press the new bulb into bulb socket
5 and turn it clockwise until it engages.
X Place bulb socket 5 back into the housing
and turn it clockwise until it engages.
Parking and standing lamp bulb
Halogen headlamps
X Turn bulb socket 3 with the bulb
counterclockwise and remove it.
X Pull the bulb out of bulb socket 3 .
X Gently press the new bulb into bulb socket
3 .
X Place bulb socket 3 back into the housing
and turn it clockwise until it engages.
Bi-Xenon headlamps
In vehicles with Bi-Xenon headlamps, the
bulbs of the parking and standing lamps are
LEDs.
! Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
Replacing bulbs for rear lamps
Tail lamp unit
The tail lamps are equipped with HiP bulbs
and LEDs. Have them replaced at an
authorized Mercedes-Benz Center.
G Observe Safety notes, see
page 348.
License plate lamps
Example illustration: Sedan
1
Screws
2 Lamp cover
X Switch off the ignition.
X Turn the exterior lamp switch to position
M .
X Open the trunk.
Practical hints
Z