Mercedes-Benz SLK-Class 2008 Owners Manual - Manual (Page 137)

136
Controls in detail
Control system
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction dis-
play:
1 Number of recorded status messages
̈ Press button j or k.
The stored messages will now be dis-
played in the order in which they have
occurred. For malfunction and warning
messages, see “Vehicle status messag-
es in the multifunction display”
(
୴ page 360).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch:
Settings menu
In the Settings menu are two functions:
ț The function To reset, push reset
button for 3 seconds. for resetting all
settings to factory standard.
ț A collection of submenus for perform-
ing individual settings for your vehicle.
̈ Press button è or ÿ repeatedly
until the Settings menu appears in the
multifunction display.
The following settings and submenus are
available in the
Settings menu:
Resetting all settings
You can reset all the functions of most of
the submenus to the factory settings.
For safety reasons, the function Headlamp
Mode in the Lighting submenu cannot be
reset while driving.
̈ Press button è or ÿ repeatedly
until the Settings menu appears in the
multifunction display.
i The vehicle status message memory will be
cleared when you turn the SmartKey in the
starter switch to position 1 or 2.
You will then only see high-priority messages in
the multifunction display (
୴ page 360).
Function Page
Resetting all settings 136
Submenus in the Settings menu 137
Instrument cluster submenu 139
Time/date submenu 141
Lighting submenu 143
Vehicle submenu 146
Convenience* submenu 147
୴୴