Mercedes-Benz SLK-Class 2008 Owners Manual - Manual (Page 298)

297
Operation
Engine compartment
One of the following messages will
subsequently appear in the multifunc-
tion display:
ț Engine Oil Level
OK
ț Add 1.0 qt. (Canada: 1.0 liter )
to reach max. oil level .
ț Add 1.5 qts. (Canada:
1.5 liters )
to reach max. oil level .
ț Add 2.0 qts. (Canada:
2.0 liters )
to reach max. oil level .
̈ If necessary, add engine oil.
For adding engine oil, see “Adding
engine oil” (
୴ page 299).
For more information on engine oil, see
“Fuels, coolants, lubricants, etc.”
(
୴ page 451).
Other display messages
If the ignition is not switched on, the fol-
lowing message will appear:
Turn on ignition
to see engine oil level
.
̈ Switch on the ignition ( ୴ page 37).
If you see the message:
Observe
Waiting Time
̈ If engine is at operating temperature,
wait 5 minutes before repeating check
procedure.
̈ If engine is not at operating tempera-
ture yet, you must wait 30 minutes
before checking oil.
If you see the message:
Cannot check engine oil level
with engine on.
̈ Turn off the engine.
̈ If the engine is at operating tempera-
ture, wait 5 minutes before checking
oil.
̈ If the engine is not at operating
temperature yet, you must wait
30 minutes before checking oil.
i If you want to interrupt the checking
procedure, press button k or j on the
multifunction steering wheel ( ୴ page 122).
i If you want to interrupt the checking
procedure, press button k or j on the
multifunction steering wheel ( ୴ page 122).