Installing towing eye bolt – Mercedes-Benz SLK-Class 2008 Owners Manual User Manual

Page 430

Advertising
background image

429

Practical hints

Towing the vehicle

Installing towing eye bolt

The towing eye bolt is supplied with the ve-
hicle tool kit, located in the compartment
underneath the trunk floor (

page 389).

The towing eyes are located on the passen-
ger side in the front and rear bumper.

̈

Take vehicle tool kit out of trunk
(

page 389).

Front cover

1 Cover in front bumper

!

Towing of the vehicle should only be done

using the properly installed towing eye bolt.
Never attach a tow cable, tow rope or tow rod to
the vehicle chassis, frame or suspension parts.

i

When towing the vehicle with all wheels on

the ground, please note the following:

With the automatic central locking activated and
the SmartKey in starter switch position 2, the
vehicle doors lock if the left front wheel as well
as the right rear wheel are turning at vehicle
speeds of approximately 9 mph (15 km/h) or
more.

To prevent the vehicle door locks from locking,
deactivate the automatic central locking
(

page 102).

i

To signal turns while being towed with the

hazard warning flasher in use, switch on ignition
and activate the combination switch for the left
or right turn signal in the usual manner – only the
selected turn signal will operate.

Upon canceling the turn signal, the hazard warn-
ing flasher will operate again.

i

The gear selector lever* will remain locked

in position P (vehicles with automatic transmis-
sion*) and the SmartKey will not turn in the
starter switch if the battery is disconnected or
discharged. For more information, see “Battery”
(

page 422) or “Jump starting” (

page 426).

Vehicles with automatic transmission*:
For information on manual unlocking of gear
selector lever, see (

page 396).

Advertising