Mercedes-Benz SLK-Class 2008 Owners Manual User Manual
Page 375
374
Practical hints
What to do if …
Display symbol
Display message
Possible cause/consequence Possible solution
•
Coolant
Stop, turn engine
off
.
The coolant is too hot.
Among other possible causes,
the poly-V-belt could be broken.
̈
Stop the vehicle in a safe location or as soon as it is
safe to do so.
̈
Turn off the engine.
̈
Apply the parking brake (
̈
Check the poly-V-belt.
If it is broken:
̈
Do not continue to drive. Otherwise, the engine will
overheat due to an inoperative water pump which
may result in damage to the engine. Contact an
authorized Mercedes-Benz Center.
If it is intact:
̈
Wait for the message to disappear before restarting
the engine.
Doing otherwise could result in serious engine
damage that is not covered by the Mercedes-Benz
Limited Warranty.
(Continued on next page)