Mercedes-Benz SLK-Class 2008 Owners Manual User Manual

Page 275

Advertising
background image

274

Controls in detail

Useful features

Reprogramming a single signal trans-
mitter button

To program a device using a signal trans-
mitter button previously trained, follow
these steps:

̈

Switch on the ignition (

page 37).

̈

Press and hold the desired signal
transmitter button (

2, 3 or 4).

Do not release the button.

̈

Indicator lamp

1 will begin to flash

after 20 seconds. Without releasing
the signal transmitter button, proceed
with programming starting with step 3.

Operation of integrated remote control

̈

Switch on the ignition (

page 37).

̈

Select and press the appropriate inte-
grated signal transmitter button (

2,

3 or 4) to activate the remote con-
trolled device.

The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
20 seconds.

Erasing the integrated remote control
memory

̈

Switch on the ignition (

page 37).

̈

Simultaneously press and hold outer
signal transmitter buttons

2 and 4,

for approximately 20 seconds, until
indicator lamp

1 flashes rapidly. Do

not hold for longer than 30 seconds.

The codes of all three channels are
erased.

i

If you sell your vehicle, erase the codes of all

three channels.

Advertising