Mercedes-Benz SLK-Class 2008 Owners Manual User Manual

Page 413

Advertising
background image

412

Practical hints

Flat tire

̈

After attaining a tire inflation pressure
of 26 psi (1.8 bar), press 0 on electric
air pump switch

3 (

page 410).

The electric air pump is switched off.

̈

Turn the SmartKey in the starter switch
to position 0 (

page 37).

̈

Detach the electric air pump.

The air hose may still be hot. Please
exercise appropriate caution.

̈

Place the electrical air pump back in
the trunk.

̈

Close the trunk lid.

̈

Drive off immediately.

The TIREFIT sealant will distribute itself
evenly inside the tire.

̈

After driving the vehicle for an initial
10 minutes, check the tire inflation
pressure using pressure gauge

b on

the air pump.

Warning!

G

If a tire inflation pressure of 26 psi (1.8 bar)

is not attained, the tire is too severely

damaged for TIREFIT to provide a reliable

tire repair.

In this case, TIREFIT cannot properly seal

the tire.

Do not drive the vehicle.

Contact the nearest Mercedes-Benz Center

or call Roadside Assistance.

Warning!

G

Do not exceed vehicle speed of

50 mph (80 km/h). A TIREFIT repair is not

designed to operate at higher speeds.

The sticker must be attached on the instru-

ment cluster where it will be easily seen by

the driver.

Vehicle handling characteristics of a TIREFIT

repaired tire may change. Adapt your driving

accordingly.

Warning!

G

If tire inflation pressure has fallen below

20 psi (1.3 bar) do not continue to drive the

vehicle.

Park your vehicle safely away from the road-

way and contact the nearest authorized

Mercedes-Benz Center or Roadside

Assistance.

Have the damaged tire replaced.

୴୴

Advertising