Mercedes-Benz G-Class 2008 Owners Manual - Manual (Page 116)

115
Controls in detail
Memory function
The memory button and memory position
button are located on each front door.
1 Memory button
1, 2, 3 Memory position button
̈ Switch on the ignition ( ୴ page 39).
or
̈ Open the respective door.
Storing positions into memory
̈ Adjust the seats ( ୴ page 42).
̈ On the driver’s side, additionally adjust
the steering wheel (
୴ page 44) and
exterior rear view mirrors ( ୴ page 46)
to the desired positions.
̈ Press memory button 1.
̈ Release memory button 1 and press
memory position button
1, 2, or 3 with-
in 3 seconds.
All settings are stored to the selected
position.
Recalling positions from memory
̈ Press and hold memory position
button
1, 2, or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
! Do not operate the power seats using
memory button 1 if the seat backrest is in an
excessively reclined position. Doing so could
cause damage to front or rear seats.
Move seat backrest to an upright position first.
i Releasing the memory position button stops
movement to the stored positions immediately.
W463.boo Seite 115 Montag, 19. November 2007 8:41 08