Mercedes-Benz G-Class 2008 Owners Manual - Manual (Page 271)

270
Operation
Engine compartment
Checking engine oil level with the
control system
When checking the oil level
ț the vehicle must be parked on level
ground
ț with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least 5 minutes with the
engine turned off
ț with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30minutes
with the engine turned off
To check the engine oil level via the
multifunction display, do the following:
̈ Switch on the ignition ( ୴ page 39).
The standard display ( ୴ page 140)
should appear in the multifunction
display.
̈ Press button k or j on the
multifunction steering wheel until the
following message appears in the
multifunction display:
One of the following messages will
subsequently appear in the multi-
function display:
ț Engine oil
level
OK
ț Add
1.0 qt
to reach
maximum
oil level
(Canada: 1.0 liter )
ț Add
1.5 qts
to reach
maximum
oil level
(Canada: 1.5 liters )
ț Add
2.0 qts
to reach
maximum
oil level
(Canada: 2.0 liters )
i If you want to interrupt the checking
procedure, press button k or j on the
multifunction steering wheel.
W463.boo Seite 270 Montag, 19. November 2007 8:41 08