Mercedes-Benz G-Class 2008 Owners Manual - Manual (Page 53)

52
Getting started
Driving
Opening the rear center seat belt
̈ Press release button 6 on buckle 5
for the free-sliding latch plate
(
୴ page 50).
̈ Press release button 3 on buckle 2
for the fixed latch plate (
୴ page 50).
Storing the rear center seat belt
̈ Allow the retractor to completely
rewind the rear center seat belt by
guiding latch plate 1 (
୴ page 51).
̈ Guide both latch plates 4 and 7
once after the other into
attachment 1 (
୴ page 50).
Seat belt outlet height adjustment
You can adjust the height of the seat belt
guide for the following seats:
ț Driver’s seat
ț Front passenger seat
ț Rear outer seats
Adjust seat belt so that the shoulder
portion is located as close as possible to
the middle of the shoulder (it should not
touch the neck).
1 Release button
Raising
̈ Slide the seat belt guide upward in
desired position.
The seat belt guide engages in five
different positions.
Lowering
̈ Pull and hold release button 1.
̈ Slide the seat belt guide downward in
desired position.
̈ Let go of release button 1.
Make sure that the seat belt guide en-
gages into place.
Please comply with the instructions for
“Proper use of seat belts” (
୴ page 53).
Warning!
G
To help prevent the possibility of injury,
always store the rear center seat belt latch
plates in the attachment when the rear
center seat belt is not in use.
W463.boo Seite 52 Montag, 19. November 2007 8:41 08