Mercedes-Benz G-Class 2008 Owners Manual - Manual (Page 173)

172
Controls in detail
Transfer case
Messages in the multifunction display
If a shift was not completed and one of the
following messages appears in the multi-
function display:
ț TC shift conditions not fulfilled
The shift did not take place. At least
one shift condition was not met.
̈ Repeat the shift procedure.
ț TC in neutral
The shift did not take place. The
transfer case is in neutral. Gear
position
N appears in transfer case
indicator 1.
̈ Repeat the shift procedure.
ț TC shift procedure canceled
The shift did not take place.
̈ Repeat the shift procedure.
ț Transfer case Visit workshop
There may be a malfunction in the
system.
̈ Repeat the shift procedure.
̈ If the shift procedure still does not take
place, have the vehicle checked at an
authorized Mercedes-Benz Light Truck
Center as soon as possible.
For more information, see “Practical hints”
section (
୴ page 361).
Warning!
G
If the transfer case is in neutral, transmis-
sion position
P will not hold vehicle. The
parking brake must be applied to hold
vehicle in place.
i If the SmartKey is in starter switch
position 0 or 1, an alarm will sound if the
transfer case is in neutral and the driver’s door is
opened.
Engage the transfer case to gear position
HIGH
or LOW.
W463.boo Seite 172 Montag, 19. November 2007 8:41 08