Mercedes-Benz G-Class 2008 Owners Manual - Manual (Page 165)

164
Controls in detail
Automatic transmission
Gear selector lever positions
The current gear selector lever position
appears in the multifunction display.
1 Current gear selector lever position
Effect
ì Park position
Gear selector lever position
when the vehicle is parked. Place
gear selector lever in park
position
P only when vehicle is
stopped. The park position is not
intended to serve as a brake
when the vehicle is parked.
Rather, the driver should always
set the parking brake in addition
to placing the gear selector lever
in park position
P to secure the
vehicle.
Effect
The SmartKey can only be
removed from the starter switch
with the gear selector lever in
park position
P. With the
SmartKey removed, the gear
selector lever is locked in park
position
P.
If the vehicle’s electrical system
is malfunctioning, the gear
selector lever could remain
locked in park position
P
( ୴ page 371).
í Reverse gear
Place gear selector lever in
position
R only when vehicle is
stopped.
W463.boo Seite 164 Montag, 19. November 2007 8:41 08