Modern AG 15' Predator - Omni - Manual (Page 3)

15’ Predatorrr - 3
this Rotary Cutter is designed with care and built with quality materials by skilled workers. Proper
assembly, maintenance, and operating practices, as described in this manual, will help the owner/
operator get years of satisfactory service from the machine.
the purpose of this manual is to familiarize, instruct, and train. the assembly Section instructs the
owner/operator in the correct assembly of the Cutter using standard and optional equipment. the
Parts Listing section is designed to familiarize the owner/operator with replaceable parts on the
Cutter. this section provides exploded assembly drawings of each cutter component illustrating
each piece and the corresponding part number.
Careful use and timely service save extensive repairs and costly downtime losses. the Operation
and maintenance Sections of the manual train the owner/operator how to work the Cutter
correctly and attend to appropriate maintenance. the trouble Shooting Guide helps diagnose
difficulties with the cutter and offers solution to the problems.
Safety is of primary importance to the owner/operator and to the manufacturer. the first section
of this manual includes a list of Safety messages, that, if followed, will help protect the operator
and bystanders from injury or death. many of the Safety messages will be repeated throughout
the manual. the owner/operator/dealer should know these Safety messages before assembly
and be aware of the hazards of operating this cutter during assembly, use, and maintenance. the
Safety alert Symbol combined with a Signal Word, as seen below, is intended to warn the owner/
operator of impending hazards and the degree of possible injury faced when operating this
machine.
Indicates an imminently hazardous situation that, if not avoided, WILL result in DeatH OR
VERY SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, COuLD result in DeatH
OR SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, maY result in mInOR
INJURY.
Identifies special instructions or procedures that, if not strictly observed, could result in
damage to, or destruction of the machine, attachments or the environment.
introduction
caution
warning
danger