Cutting component inspection, Operation, Opera tion – Modern AG 15' Predator - Omni User Manual

Page 39: Danger

Advertising

15’ Predatorrr - 39

operation section

cutting component inspection

Inspect blade pan and blade assembly for the following:

Inspect the Blades daily for abnormal wear. RePLaCe BOtH BLaDeS on that carrier ImmeDIateLY if

either blade has:

• Become bent or deformed from it’s original shape or

• any cracks are visible, or

• Deep gouges in the blade’s surface are present, or

• Gouges or chipped areas in the cutting edge are larger than 1/2”, or

• the material on the leading edge has been worn away by more than 1/2”

Failure to replace abnormally worn blades may lead to catastrophic failure of the blades and ejec-

tion of the broken part with tremendous force which may cause serious bodily injury or death.

OPERaTION

FL15M 02/07

Operation Section 4-24

OPERa

TION

9.3 Cutting Component Inspection

Inspect blade pan and blade assembly for the following:
OPS-U-0031

Inspect the Blades daily for abnormal wear. REPLACE BOTH BLADES on that carrier

IMMEDIATELY if either blade has:

•

Become bent or deformed from it’s original shape or

•

Any cracks are visible, or

•

Deep gouges in the blade’s surface are persent, or

•

Gouges or chipped areas in the cutting edge are larger than 1/2”, or

•

The material on the leading edge has been worn away by more than 1/2”

Failure to replace abnormally worn blades may lead to catastrophic failure of the blades and ejection of the

broken part with tremendous force which may cause serious bodily injury or death. OPS-U-0032