QOMO QRF300 User Manual - Manual (Page 31)

Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com 31
3.3 Template Design
Using the Template Design , you can design various types of template models and save them into
the system. When creating future tests, you can easily bring these template models into the Exam
Editor . The QClick system provides some basic default template models and is loaded when you
use the Template Design for the first time.
To use the Template Design , follow these steps:
1. Select Template Design Tab.
2. To edit an existing template design file, click the Open button; this will display your
file browser and allow you to choose a file.
3. To create a new Template Model file, click the New button; and a blank PowerPoint
slide will displays.
4. Click the Add button; the software will display a system question Template list with
different alignment options. Select the template option by clicking on it, and the selected
template will be added to your template design file.
5. To add a name or identification for new slides; click on the Template Name text box to enter
the name for the current design template being edited, and then press the “ Enter ” key.
6. Typically, a new template will be displayed in the template list in alphabetical order. If you
choose to re-assign the placement, click the block you desire to assign on the PowerPoint
Slide display (Question Title, Options…) and then click the Option Assignment drop-down
list to select either “Qu_Title” or “Options”. For example, if you want the first option block to
be assigned to option B, click and select the first option block and then click the Option
Assignment drop-down to select “Option B”.
7. To delete the currently edited template slide from PowerPoint template file, click the Delete
button. The software will prompt you for deletion confirmation.