SINGER 9985 QUANTUM STYLIST TOUCH - Manual (Page 38)

38
i ii
g. Elongation Button
Some patterns may be elongated up to 2 times
the original length. You may elongate the
pattern by touching elongation button.
i. Regular length
ii. Elongated
If the mirror/reverse or elongation button does
not appear in this area, the pattern cannot be
changed.
h. Stitch Width
Machine will set the stitch width suitable for the
pattern. You can make changes as follows.
For narrower width, touch the [-] button.
For wider width, touch the [+] button.
Pre-set stitch width will be indicated as a
highlighted number.
For straight stitch patterns (No. 1, 2, 3, 4, 6,
8), Stitch width buttons will change the needle
position.
To shift the needle to the left, touch the [-]
button.
To shift the needle to the right, touch the [+]
button.
i. Stitch Length
Machine will set the stitch length suitable for the
pattern. You can make changes as follows.
For shorter length, touch the [-] button.
For longer length, touch the [+] button.
Pre-set stitch length will be indicated as a
highlighted number.
Note:
When further width or length adjustments are not
possible, machine will emit multiple audible beeps.
If the width, length or number icons are not
indicated, the pattern cannot be changed.
Adjustments to the patterns may be made while
sewing.
j. Home Button
Whenever you touch this button, LCD will
display the Home screen.
k. Return Button
When you touch the return button, LCD will
indicate previous mode (Stitch selection mode).
g
g
h i
h i
j
k