SINGER 1507WC - Manual (Page 33)

26
A
B
D
C
A
C
B
D
A
* The automatic needle threader is a factory installed option. If
your machine has this option use the following instructions:
-Raise the needle to its highest position.
-Press lever (A) down as far as it will go.
-The threader automatically swings to the threading position (B).
-Pass thread around thread guide (C).
-Pass the thread in front of the needle around the hook (D)
from bottom to top.
-Release lever (A).
-Pull the thread through the needle eye.
Attention:
Turn power switch to off ("O")!
Automatic needle threader (optional) GB
1
2