Trim attachment stitch function – SINGER 1507WC User Manual
Page 81
Advertising
GB
Trim attachment stitch function
- Set the stitch pattern dial to zigzag.
- Set the stitch length to "0".
- Sew 6 to 8 stitches to secure the trim in place.
-Then set needle to right needle position and then to sew the
length of the trim.
- Set stitch pattern dial to straight stitch.
-Sew 2 to 3 stitches to tie off.
-This function is used to attach trim or ribbon to a sewing
project.
0
1
2
3
4
74
Advertising
This manual is related to the following products: