SINGER S10 STUDIO Instruction Manual - Manual (Page 25)

25
e
w
q
r
r
e
r
w
w
w
Attaching the Embroidery Hoop to the Machine
Step z
Raise the presser foot. When hooping bulky fabrics
remember the presser foot lifter can be raised even
higher to help get the hoop under the foot.
Step x
Place the prepared hoop on the machine.
Position the hoop by aligning the notches of the hoop
with the carriage pins.
q
Notch
w Carriage pins
e Carriage
Step c
Shift the lever on the carriage in the direction of the
arrow.
r Lever
Step v
Attach the hoop by pushing the lever in the direction
of the arrow to ensure the hoop is in the lock position.
Removing the Hoop from Machine
Step b
Raise the presser foot.
Step n
Shift the lever in the direction of the arrow and remove
the hoop.
r Lever
NoTE
• Carefully monitor the area around the hooped fabric
as the machine embroiders. Many projects like shirts,
jackets and blankets are bulky and can possibly get
caught in the area of the carriage arm t.
• Never try to move the carriage by hand or touch the
carriage while it is moving.
t
zx
c v
bn