Vinten Radamec Fusion FPR-210 - Manual (Page 15)

Operators guide
13
6. Push down on the steering ring [21] against residual pressure and release the
column lock [5]. Allow the column to extend under hand restraint.
Mounting a Quickfix ® adaptor
In situations where heads are often interchanged on pedestals and tripods, it is recommended
that a Vinten heavy-duty Quickfix adaptor (part no. 3490-3) is used. The adaptor provides an
easier and quicker method of mounting and removing heads from a pedestal or tripod. Mount
the adaptor onto the pedestal or tripod mounting plate and secure into position following the
installation instructions in the Operators Guide supplied with the adaptor (part no. 3490-8).
The Quickfix adaptor has a safety latch mechanism that is used to secure the head into position
on the Quickfix base.
Fig. 5 Quickfix Adaptor
Fig. 6 Safety Latch Mechanism
Safety button
and clip
Red safety latch
UNLOCKED
LOCKED