Vinten Radamec Fusion FPR-210 - Manual (Page 22)

Fusion FPR-210 + pedestal
20
3. Connect the other end of the cable into the height control socket [17] near the side
of the pedestal column
Operation
Parking brake
The pedestal base is provided with a parking brake [18] on one wheel. The brake is not designed
to slow the pedestal while in motion (see Fig. 1).
Rotate the slider [18] counter-clockwise to engage the brake or clockwise to release it.
Cable clamp
A cable clamp is provided on the base [16] and the power box [29] at the South side of the
pedestal (see Fig. 1 and Fig. 3).
Fig. 12 Pedestal height control socket
CAUTION! Do not apply the brake while the pedestal is in motion. The pedestal
may become unstable and the brake may be damaged.