Vinten Radamec Fusion FPR-210 - Manual (Page 19)

Operators guide
17
• The auxiliary (Aux) power output socket [32] is protected by a system fuse, but is
permanently live and intended to power the ICE interface.
USB configuration port
The USB port [23] is located beneath a protective cover on the North side of the base. This port
allows external connection to a pedestal configuration software tool.
Servo configuration port
The servo configuration port [24] is located beneath a protective cover beside the USB port [23]
and allows trained service engineers to configure servo motor settings.
Fig. 8 ICE Interface Power Connection