Vinten Radamec Fusion FPR-210 - Manual (Page 4)

Fusion FPR-210 + pedestal
2
Safety instructions
Important information on the safe
installation and operation of this product.
Read this information before operating the
product. For your personal safety, read
these instructions. Do not operate the
product if you do not understand how to
use it safely. Save these instructions for
future reference.
Warning Symbols Used in
these Instructions
Safety cautions are included in these
instructions. These safety instructions must be
followed to avoid possible personal injury and
avoid possible damage to the product
Intended Use
This product is designed for use within
television studios to support a payload
weighing up to 95 kg (210 lb). The total
payload must not be exceeded. The FPR-
210
+ pedestal can be moved manually or
remotely to allow operators to control their
movements and positioning around the
studio.
WARNING!
Where there is a risk of personal
injury or injury to others, comments
appear supported by the warning
triangle symbol. Where there is a
risk of damage to the product,
associated equipment, process or
surroundings, comments appear
supported by the word ‘Caution’.
ELECTRIC SHOCK
Where there is a risk of electric
shock, comments appear supported
by the hazardous voltage warning
triangle.
WARNING!
130 kg/286.6 lb LIFTING AID
REQUIRED. Use a lifting hoist
capable of safely lifting the product.
The product is intended for use by television
camera operators, trained to use Vinten
Radamec robotic equipment. Do not use this
product for any other purpose other than that
specified in this usage statement.
Electrical Connection
Basic Electrical Insulation
(Class 1 equipment)
CAUTION! This product must be
connected to a power supply of the
same voltage (V) and current (A) as
indicated on the product. Refer to
the Technical Specifications for the
product.
CAUTION! We recommend that you
use the power supply cable supplied
with the product.
CAUTION! Always use a fuse of the
correct type and rating for the
product. Refer to the Technical
Specifications for the product.
CAUTION! Using alternative power
sources will invalidate the system
EMC liability.
WARNING! This product is Class 1
equipment. For safe operation this
equipment must be connected to a
power supply that has a protective
earth connection (US: ground).