Figure 8). you can return, Er pedal (23), R (figure 8) – Vinten Radamec Quattro SE PDA User Manual
Page 26
Advertising
24
The edge of the pedestal base does not need to be exactly parallel to the X-axis, but the path across
the X-axis must not be parallel to the line between the two opto sensors (22), i.e. parallel to the back
edge of the pedestal base (Figure 9).
Figure 8 MK II floor target—possible homing paths across X-axis
(23)
Home—pedal at front
Home—pedal at rear
Advertising