Vinten Radamec Quattro SE PDA - Manual (Page 30)

28 Quattro PDA Operators Guide
Displaying the current software and firmware versions
To display the software and firmware version information for the Quattro PDA software, HPM and
pedestal (Figure 12), select SETUP (2) on the main window and then ABOUT (25) on the Setup
window (Figure 11). If communication with a device is not established, the software version will
appear as x.xx (Figure 12).
Opening and saving configurations
Alternative setup configurations can be saved and recalled as required. To save a setup configuration:
1. Select SETUP (2) on the main window, then SAVE AS (29) on the Setup window (Figure 11).
2. The Save as window appears (Figure 13).
3. Type the desired file name into the name text box (30) using the touch screen keyboard, accessed by
selecting the keyboard icon (35).
4. Select either the main memory or the memory card from the drop down menu as the destination
storage location (33).
5. Select the appropriate SAVE FOLDER (31) from the drop down menu.
6. Ensure that the file type drop down menu (32) is set to *.dat (32).
7. Select SAVE (36) to save the setup configuration or CANCEL (34) to exit without saving.
Figure 12 About window