Vinten Radamec Quattro SE PDA - Manual (Page 33)

Publication Part No. V4015-4980 Issue 2 31
3. Reposition the camera as required to align the camera angle to the virtual camera angle.
4. Select STOP OFFSET TRIM (41).
5. Move the camera and ensure that virtual camera movement matches.
6. To save the camera trim changes, select OK (43). To revert back to the original settings select
CANCEL (42).
Figure 15 Offset trim window
NOTE: Although all movement axes can be corrected using the offset trim
function, the pan axis is the most likely to build an error.
NOTE: Once saved (43) camera trim changes are permanent. The pedestal
must be re-homed if the camera angle is very different to the virtual
camera angle (see Homing the Quattro SE system on page 21).
(41)
(42)
(43)