Welch Allyn LS200 Procedure Light - User Manual - Manual (Page 27)

Directions for Use Chapter 3 Maintenance 21
9. Carefully slide the lamp into the lamp holder with two fingers,
making sure the two pins on the base of the lamp slide into
the socket and the reflector slides under the spring (see H).
10. To assure proper placement in socket, gently push lamp into
socket until completely seated and snap into place (see I).
11. Replace bezel. Be certain to align the three smooth
“windows” in bezel with lamps and tabs on edge of bezel
with grooves in white housing (see J).
12. Replace handle and rotate clockwise until secure (see J).