Xpres Cut Plus: Ultragraphics Roland GX-24 Manual - Manual (Page 10)

The Xpres Cut
®
Plus process continued
10
Step 4
Drag a box around the whole image
(image & cut line) and reposition image
on the template. ensure the image is
within the crop mark area as in the
diagram (red boxed area).
Step 3
Produce a hairline cut line around your
image using the Bezier tool and shape
tool. For more information on how to
produce a cut line refer to page 13.
It is recommended that your cut line
colour is unique to the rest of the image.
Magenta is a popular colour as this can
be identified easily. to change the colour
of the cut line, highlight the cut line and
right click on the colour on the colour
palette.
Step 5
click on Arrange > transformations >
Position. Drag a box around the image
and cut line using the Pick tool. While
the image is highlighted use the
transform docker bar (as shown) on
the right hand side to duplicate the
images.
tip: Use about a 5mm space
between each image by increasing the
Horizontal (H) and Vertical positions (V).