Driver settings – Xpres Cut Plus: Ultragraphics Roland GX-24 Manual User Manual

Page 15

Advertising

Xpres currently recommend the epson D120/B1100 printers using pigment ink for the Xpres cut Plus Process.
For the correct settings for these printers please see below.

For other pigment printers, as a general guide we recommend to set the print driver to ‘Plain Papers’ and ‘Photo’, however
Inkjet Printers do differ in terms of speed and quality, always test for suitability.

Epson D120/B1100

to set the epson D120/B1100 for Xpres cut Plus printing follow these steps:

•

Firstly close down corel Draw.

•

click start > control Panel > Printers and Faxes Folder

(’Printers’ folder if using Windows Vista)

•

now right click the ‘epson stylus D120/B1100 series’ and select

‘Printing Preferences’.

•

now select the Advanced tab or click the Advanced button if applicable,

you should now see the window right.

•

Make sure that the second drop down list is set to ‘Photo’ as shown (no. 1).

•

now click ‘save settings’ (no. 2), when prompted to enter a name type

‘Xpres cut Plus’ and click ‘save’.

•

now click oK on all relevant windows to confirm the new settings.

* For Inkjet 1000 XP3117/8 you can tick the ‘Mirror image’ button in the
Layout tab and save a new setting if required.

Epson B40W/B42W

to set the epson B40W/B42W for Xpres cut Plus printing follow these steps:

•